Poland Residence

Location: Kennewick

Owner/developer: Dennis Poland

Project team: Dennis Poland, general contractor; Concrete Impressions Northwest, concrete contractor; Central Pre-Mix Concrete, ready-mix supplier

More than 75 percent of the flooring in the Poland residence in Kennewick is decorative acid-stained concrete.

To create the floors, the concrete was poured and given a hand-trowel finish. Next, the pattern and design were cut in with a hand saw and then stained.

Two coats of wet-look lacquer sealer were then applied. After the sealer dried, a sanded grout was applied to the saw cuts. The floor was then finished with five coats of traffic coat wax to give the finished floor a durable wear surface.